Ford Ranger 20 Inch CNC Black Flow Formed Alloy Wheels ET0 - Set of Four

Overview

Flow formed construction and a CNC cut black face, built for the Ford Ranger and the wider 6x139.7 pickup family. The ET0 offset is the most aggressive in our Ranger range, pushing the wheel well outboard for a deep dish stance.

Key Features

• Flow Formed Construction: The barrel is spun under heat and pressure, which gives a stronger and lighter wheel than a standard cast item at the same size.
• CNC Cut Face: Machined detailing over a black finish for a sharper look than a plain painted wheel.
• ET0 Offset: A deep dish stance that sits the wheel considerably further out than the factory setting.
• Wide Pickup Fitment: 6x139.7 PCD also covers Hilux, Land Cruiser and other 4x4 pickups.
• Complete Set of Four: Supplied as a full set so all four corners match.

Compatibility:
Ford Ranger T6, T7, T8 (2012-2022)
Ford Ranger T9 (2023 on)
PCD 6x139.7, centre bore 106.1mm, offset ET0, diameter 20 inch
IMPORTANT: this wheel has a 106.1mm centre bore and the Ford Ranger hub is 93.1mm. Spigot rings are required for the wheel to sit hub centric. Contact us before ordering and we will confirm ring supply.
At ET0 the wheel sits significantly further out than standard. Check arch clearance and tyre coverage for your vehicle before ordering.
Please confirm your current wheel and tyre size before ordering. These are not genuine Ford parts.

Performance Benefits:
Flow forming improves barrel strength for a given weight, which is worth having on a vehicle that carries and tows. The low offset widens the track noticeably.

Materials & Construction:
Flow formed alloy with a CNC machined black face. Supplied with centre caps.

Installation & Fitment:
Direct bolt on fitment using your existing wheel nuts, with spigot rings fitted. We recommend fitting by a qualified tyre technician and torquing to the manufacturer's specification. Re-check the torque after the first 50 miles.

What's Included

• 4 x 20 inch Alloy Wheels
• 4 x Centre Caps